Tweets off headunit?

[Techchild]

Is it possible to run tweets off headunit power? Not components just tweets maybe with some sort of bass blocker on them

[caps]

possible, yes

[Techchild]

I'm just trying to figure out if I just ran 4 mids it would sound wierd without some tweets. And I don't have enough room or money for a small amp for them, so I just thought I might be able to run them off headunit power.

[audioaddiction]

Yes and some do get loud on just deck power.

[Techchild]

Yes and some do get loud on just deck power.

Alright cool about to put in my order for pe can't wait to get this all hooked up.

[caps]

i love parts express

[Techchild]

Before I put in this order would these bass blockers work for the tweets?
Also according to amazon my head unit puts out 45x4 rms thats not right is it?
headunit: sony xav-7w

http://www.partsexpress.com/pe/pshowdetl.cfm?&Partnumber=266-220&scqty=2

[pimpedout97x]

itll work,

just make sure you dont turn up the HU too high and clip the tweets...

[PEDRO MODEAN]

http://www.car-fi.com/techcenter/xovers-2ohm.htm

this may help you.

[Techchild]

itll work,

just make sure you dont turn up the HU too high and clip the tweets...

When I have all the gains set right on my amps I don't plan on turning my headunit up over 3/4.
I feel like a complete beginner again since I'm going for a diffrent style of music listening.

[Techchild]

http://www.car-fi.com/techcenter/xovers-2ohm.htm

this may help you.

That just confuses me. :crazy2:

[PEDRO MODEAN]

i have a power acoustik amp rated at 220x 2 for 50. if you need an inexpencive amp.

has full xover for those mids. its an LT980. http://ampguts.realmofexcursion.com/Power_Acoustik_LT980-2/

[Techchild]

I have a crunch100.4 that has full xover for the mids but I will still have my rev components running on two of the channels then my 6.5s running on the other two, and just wanted to get some tweets and thought of running them off the headunit.

[pimpedout97x]

http://www.car-fi.com/techcenter/xovers-2ohm.htm

this may help you.

i understand it somewhat.

what ohm are your tweets?

[Techchild]

i understand it somewhat.

what ohm are your tweets?

4ohms, the ones I ordered come with a "crossover capacitor"