Pics of my newist creation (thanks to Rad designs) lol

[mrwigglezdj]

:D 8) this is my new creation just finished tonight ready for me to get the wall base done so i can put the box in and seal er off
well lol thats all i have untill my wall is done and box is in but ill keep everyone posted, and rad im sorry but my yahoo was messing up and thats why i didnt send these pics, so to avoid trouble i decided to do em like this

[Peteyglad]

I mst say that it is a mighty impressive box. I hope it does well for you!

[mrwigglezdj]

well the box is in its place now (DAM WHAT A HEAVY MOFO THAT WAS LOL) tommrow ill begin sealing it off to complete the wall and on the 27th @pei well see how it works and hope and pray its louder than 134.2db lol

[lozinit]

I thought you were gonna call me yesterday so I could help ya with the beast. :o

[mrwigglezdj]

i was going to but i had to do the 2nd layer of mdf on the box and add my all thread, and get the platform finished and i didnt want to take time away from your family esp since i wasnt as close to ready for the box to go in as i hoped

[SPL Hoopty]

ya need to learn to down size your pics befoe posting them.
i cannt see the whole picture...lol...
looks like it coming along well.

hey lozinit, what are your plans with your car now???????

[mrwigglezdj]

well i resized these 2 hope they work, its the box
with a layer of foam board and then with
1/4 inch luan on it, almost done with the
wall got to get about 7 more tubes of
silacone and 5 cans of expandafoam
to seal it off as good as i can get it
but either way its almost ready for
a coat or two of high gloss laquor


http://i42.photobucket.com/albums/e350/mrwigglezdj/spl2.jpg

http://i42.photobucket.com/albums/e350/mrwigglezdj/spl1.jpg

[Peteyglad]

Can't wait to hear. I will not be at the PEI show so it will have to wait until the next show. I will be going to the MECA event in Dothan on June 4th and the double point IASCA event in Troy, AL. on the 17th. Anxious to see what an increase you get from this setup.

[lozinit]

Rad,
I'll try to call you later tonight and discuss a few things.

The short and sweet though is going as loud as I can in my class using my existing car.
I've got a deal I'm working on right now trying to get some more power from an amplifier company based here in FL.
Through the talking, I've gotten them from a minimal partial sponsorship to 30% off of dealer price. Still not good enough for me, so I'm holding out to see if they want to do the whole full sponsorship thing. Who knows. Not holding my breath about it though.

Either way, as you said before it's just gonna take raw power from here on out to get into the top. And from my calculations, it's going to get rather pricey, so I'm trying to find a way to lower the cost so it'll be managable.

Brandon, The wall looks pretty good! Can't wait to hear it at the next show. I'd put money on it that you'll get a much higher score than before.
Depending on how much of an improvement you make with it, I may have to steal your fuses to keep yours quieter than mine. LoL

~Mike

:lol:

[SPL Hoopty]

looking good brandon, never seen foam board used so it will be interesting how it does. two more weeks till the next show.

[Excessive Amperage]

MECA event in Dothan on June 4th

Where is it going to be and who is having the show ? I am in Dothan! I will probably be there.

MECA event in Dothan on June 4th

Where is it going to be and who is having the show ? I am in Dothan! I will probably be there.

Going to be in the Car Toys parking lot
3505 Montgomery Hwy

I take it you will be there? :lol:

I have emailed them about the time. Have not heard back from them yet. Usually they have tuning at 10 and the show starts at noon but I am just trying to confirm that.

[Excessive Amperage]

Yeah, I will plan on being there. I am supprised Ray did not let me know about it, I would have helped him put it together and maybe done a drawing for a free alternator. I will have to call him tomorrow.

[Peteyglad]

Rad is with IASCA and this is a MECA event so I don't think he would be running it, but hey, he surprises me everyday. LOL.

[Excessive Amperage]

I am refering to Ray McKenzie, Not Rad. Ray is the owner of Car Toys.

[Peteyglad]

LOL. I am sorry, I just read too fast.

[Excessive Amperage]

I look forward to meeting you.

[Peteyglad]

Same here. If you call Ray tomorrow, try to find out when the show starts. I am guessing 10, but I would like to know for sure.

[mrwigglezdj]

8)
well i got the box trimed out and painted it a high gloss white so i can clean it and behind the subs i painted it a gloss black along with the port,
and heres a snap shot of the whole box , let me know what yall think about it..lie if you have too lol

http://i42.photobucket.com/albums/e350/mrwigglezdj/spl11.jpg

[Peteyglad]

I like the gloss! Have ou had a chance to meter it yet or will that come in Ft. Walton?

[mrwigglezdj]

ill have to wait till fortwalton, im too cheap to pay 25 dollars to the local shop who only has the mic system, id rather pay 30 and go to a competition, have fun see some different setups and have a great time, o and put another competition under my belt win or loss

[lozinit]

lookin good Brandon.
Paint the pedestal as well if you haven't already.

Yeah, I'd wait until the contest as well. The ac meter they use at the shop is good, but I got up to a 9db difference from it and the termlab.


Just remember what I said about your fuses. LoL. Like a thief in the night. :lol: :twisted:

[mrwigglezdj]

8) :lol:

[SPL Hoopty]

looking good, Cannt wait till this weekend to see what it does.