need help with wall design for civic

[lorilee8284]

i have a 90' civic hatch and i am trying to have it wall for next friday. the subs are 15" fully loaded BTL's and amp is a cadence c5. any help would be great

[iamamp3pimp]

gonna need some dimentions brother.

[lorilee8284]

i can go 35width 36height, i want to tune it low for daily with port at top

[NT_Hardcore]

how many subs you runnin?

[lorilee8284]

i am going to be running 2

[sweet&low]

whats the max depth

[lorilee8284]

depth i can go 25

[iamamp3pimp]

well its not going to be a square, so the dimentions need to be more precise than that.

[sweet&low]

Cut Sheet

Box

Top/Bottom 25 x 35"
Sides 34.5 x 25"
2 Front/Back 34.5 x 33.5"

Port
Runs entire length of box at the top and is 4" tall. So the opening is 33.5 x 4. Tuned to 32hz

Port 33.5 x 21.25


Someone else can draw a picture to lazy to do it.

[sweet&low]

well its not going to be a square, so the dimentions need to be more precise than that.

He might be able to get it in there I put one real close to that size through the door of my civic.

This box was 33" x 33" x 24" and it fit through the door.

http://i161.photobucket.com/albums/t209/b16acivic/th_MOV02647.jpg (http://s161.photobucket.com/albums/t209/b16acivic/?action=view&current=MOV02647.flv)

[lorilee8284]

how many cubes would that give me

[sweet&low]

think it was 6.9 left per sub after port and sub displacement

[tater]

y r u walling a hatch?

[lorilee8284]

i am walling it cause i havent had a walled vehicle yet

[AirMan]

Well let's build it man. Get it laid out on paper and I can get it done while you build my door pods : )

[lorilee8284]

i will get with you airman when i can get some time to come down there

[Jim...............]

We've done 15" btl's in boxes from 4cubes to 8 cubes and they like it best right in the middle for street beating, so I would do 6 cubes after port and displacement.

[AirMan]

lee- I might do a 12" mid in each door, if you think you can make those work with my door panels let me know. leave room for a tweeter to be cut into it if you can

[lorilee8284]

aight i will try.