working on the mini again lawl

[Zade08]

the inside of your mini is going to look like the flight deck of a 747.

For soem reason I like the way this sounds. :-)

[pimpedout97x]

need some ideas.. almost done with the wall, needs a little more sanding on the sides of the trim panel then ill get it all covered once im completely done with all glassing and interior work.

over the last ~2 years, my suede headliner doesnt really look new with all the bondo and sanding and dust thats in it, i can clean it but id rather redo it, and this gives me the chance to fiberglass it how i want. im gonna cut it out and then fiberglass my a/c controls up there, as well as a little 7" screen i have to be used for a reverse camera. any other cool ideas i could put in the headliner? theres not much headroom so it cant be anything with a lot of depth.

the door panels are almost done, but i may delete at least 2 mids and 2 tweets out of each door due to the tight fit. i already have all the mids/tweets so i need to put those elsewhere. the top of the dash has a bit of room, enough to fit those 4 mids and 4 tweets glassed in firing up so im gonna do that, should be easy. its gotta be re-upholstered anyways so why not.

any other ideas? might build a small console as well.

btw- when funds allow, new gear will be all IA (except the mids, although i know IA is working on mids but i still want to run my PA mids/tweets.)

4 20.1s, maybe 30.1s if they come out by the time im ready to buy
2 18" wardens
couple ia 6.4s for the mids/highs amps
deka 9a31 batts (around 6, ill be getting these shortly)

headliner will be suede again, wall will be black vinyl, the amprack for the IA6.4s below my subs will be black suede, seats will be suede, dash will be vinyl with suede accents, doors will be black vinyl along with the kick panels etc. and the console not sure yet, but probably vinyl with suede accents.

[WaTTz305]

good luck.








bwahaha

[pimpedout97x]

Today, 01:52 AM
Remove user from ignore listWaTTz305
This message is hidden because WaTTz305 is on your ignore list.

[CBFryman]

good luck.








bwahaha

VJ not everything wattz says is dumb as ****.

[pimpedout97x]

lol well im not gonna take him off ignoresauce to see if its stupid or not, becusae if it is stupid, then i just read it so that defeats the purpose of ignoresauce feature

[01xtreme]

lol well im not gonna take him off ignoresauce to see if its stupid or not, becusae if it is stupid, then i just read it so that defeats the purpose of ignoresauce feature

Very astute observation. This means we're going to have ANOTHER Incriminator fanboy??? j/k robin, and cricket.

[TazDevil]

lol. agreed on the good luck. sounds like its gonna be slick though. pics or it didnt happen.

[fearof85]

Lets see those pics.


Drew

[05blackneon]

Today, 01:52 AM
Remove user from ignore listWaTTz305
This message is hidden because WaTTz305 is on your ignore list.

Remove user from ignore listCBFryman
This message is hidden because CBFryman is on your ignore list.

I see you 1,and raise you 1!
True Story

[pimpedout97x]

trying to figure out how i wanna lay this out, then ill build a frame for the console out of wood then glass it up..ideas are welcome...still not sure if ima put leave a HU in or not...

i guess i should have a HU..doesnt have to be an expensive one either just something with good preouts

http://i249.photobucket.com/albums/gg234/pimpedout97x/IMG00088-20100204-1016.jpg

http://i249.photobucket.com/albums/gg234/pimpedout97x/IMG00089-20100204-1051.jpg

http://i249.photobucket.com/albums/gg234/pimpedout97x/IMG00090-20100204-1052.jpg

http://i249.photobucket.com/albums/gg234/pimpedout97x/IMG00093-20100204-1052.jpg

kinda like the switches at the top (windows, locks etc)

http://i249.photobucket.com/albums/gg234/pimpedout97x/IMG00094-20100204-1102.jpg

[Zade08]

FAIL FAIL FAIL. Do I have to come by and show you where to stash everything princess?

[pimpedout97x]

you got any ideas give me a call jigaboo <3

[CBFryman]

Remove user from ignore listCBFryman
This message is hidden because CBFryman is on your ignore list.

I see you 1,and raise you 1!
True Story

Feg.

http://i50.tinypic.com/aoubkk.gif

[CBFryman]

After 5 years of work the Warden is finally here! The newly coming Warden is the next generation of all out SPL monsters – forget everything you’ve seen until this point. The Warden is the first True SPL subwoofer on the market that boost a steel top plate for maximum transfer of magnetic flux from the neodymium magnets to the gap which in turn equals more magnetic force to drive the cone to Extreme SPL levels. These six neodymium magnets act as one through one common top plate. Other subwoofers on the market have an aluminum top plate, which keeps the columns separated; this causes each column to independently transfer magnetic flux. This results in less SPL because the spaces between the columns do not transfer flux. For example if the Warden is say 500 horsepower in the gap, that power is constant, as the transfer of flux surrounds the coil and pushes and pulls on it with one authority. If the other unit was 500 horsepower too it would only be constant in the locations where the columns are located, the space between the two would be zero force, and the end result is less SPL.

I LOLd so hard

You're going to spend 2300 on two subs that say have like 500hp in the gap and if the coil have 500hp then that is constant and say like then SPL lots.

[xdiibilly]

the inside of your mini is going to look like the flight deck of a 747.

[Back Yard Custom's]

WOW work on the mini?@?!!? DO WORK

[CBFryman]

the inside of your mini is going to look like the flight deck of a 747.

He should add infrared sensor hooked to a HUD for night driving with all the tintz. Then he could get infrared headlights and drive with all his lights off all murdered out and no one could see him.

"Officer, I dont need to see THROUGH the windshield because I can see everything on the windshield!"

Then he could call it the fighter jet on wheels.

[pimpedout97x]

I LOLd so hard

You're going to spend 2300 on two subs that say have like 500hp in the gap and if the coil have 500hp then that is constant and say like then SPL lots.

not spending 2300 lol..

[CBFryman]

not spending 2300 lol..

mmkay

Well either way

http://www.hoagieshouse.com/IR/

Do it, at least for a back up camera. It's BA. Only do it right and just get black polarized film instead of cutting up POS negatives. You could also tint the lens to help out with blocking light. An IR camera only requires a bit of visible light. To ensure that you can see you can get infrared LED's and put them on your car.