$650 Ballin On A Budget Build

[jay-cee]

Leave it stereo and don't worry so much about Power right now. If anything work on gettting your matching mids then either get a bigger 4 channel amplifer or add on another amp for either mids or highs duty. Just a thought

[PHATBOi]

S.Rtv is on 1, but I turned LOUD off (had it on low) and turned SLA to 0 (had it on 1).

[PHATBOi]

Got 1.25K and 3.15K backed all the way down to -6 and 8K at -4 on my EQ.

[BigBoi]

Originally Posted by PHATBOi

S.Rtv is on 1, but I turned LOUD off (had it on low) and turned SLA to 0 (had it on 1).

try s rtv 3
sla 0n 2

[PHATBOi]

Originally Posted by BigBoi

try s rtv 3
sla 0n 2

My Srtv only goes to 2 ...

[PEDRO MODEAN]

ok, then just get a line out converter for the rear Speaker outs and use your head units crossover to the 4 ch.. run it as a 4ch. to your mids and tweets.

thats how my front stage is set. front runs the doors and rear runs the dash...this way you can fade to match the sound coming from your speakers.

if anything you also gain the extra output from the other set of rca's so you dont have to run splitters and you can use the built in xover on your head and amp.

[fearof85]

Originally Posted by PEDRO MODEAN

ok, then just get a line out converter for the rear Speaker outs and use your head units crossover to the 4 ch.. run it as a 4ch. to your mids and tweets.

thats how my front stage is set. front runs the doors and rear runs the dash...this way you can fade to match the sound coming from your speakers.

if anything you also gain the extra output from the other set of rca's so you dont have to run splitters and you can use the built in xover on your head and amp.

this^^^

[jay-cee]

In case you wanted to know the Crescendo XST-CX crossovers are high passed at 4,400hz with a 12db slope.

[PHATBOi]

Originally Posted by jay-cee

In case you wanted to know the Crescendo XST-CX crossovers are high passed at 4,400hz with a 12db slope.

Thanks. Just realized I can run the tweets active off my HiFonics Eagle FTW! So I won't be needing the xovers afterall. My Eagle will also send the low pass thru the output into my 1kc4, then I can set the hpf on the 1kc4 bandpassing my cendo 8's.

[PHATBOi]

Will be gettin a set of the new Crescendo 1" tweets as well when they come out just to run off the headunit channels. I already have the holes cut in the a pillars, might as well use em.